Ball Joint Kit, Double Drilled, 5x130 with 14x1.5mm threads / 5x4.75" with 12mm threads, (Requires 69 on Style Tie Rod Ends) -With-the-addition-of-a-30mm-face-allowing-for-full-contact-when-used-with-higher-lift-cam-profiles-these-lifters-can-fill-the-needs-of-any-racer

-With-the-addition-of-a-30mm-face-allowing-for-full-contact-when-used-with-higher-lift-cam-profiles-these-lifters-can-fill-the-needs-of-any-racer

Allows-you-to-adapt-your-linkage-to-fit-any-EPC-32/36F

-Type-2-w/-002-Transmission

-Stainless-Steel-Clamps-Available-(00-9593-0) (SKU: 95940)

-They-will-extend-point-life

Ball Joint Kit, Double Drilled, 5x130 with 14x1.5mm threads / 5x4.75" with 12mm threads, (Requires 69 on Style Tie Rod Ends) -With-the-addition-of-a-30mm-face-allowing-for-full-contact-when-used-with-higher-lift-cam-profiles-these-lifters-can-fill-the-needs-of-any-racerDrop your front stance 2 1 2" and add the benefits of disc brakes all in one package. Kits come with all necessary components including rotors, calipers & pads, wheel bearings & seals and hardware. Link Pin kits include brake lines, thrust washers and spindle nuts. Wheel studs are not included. Spindles are off set 1 4", which widens your track a total of 5 8". Ball Joint Kits require the use of 69 & later tie rod ends. Must use with minimum 15"